Category 6 Ethernet cables of various lengths for use with Ethernet camera systems. Shielded CAT5E, CAT6 or CAT6A Ethernet cables are recommended for harsh EMI environments and system CE compliance. Shielded cables can be purchased at numerous online retailers, or as special order items through OptiTrack. Compatible Cameras: PRIME SERIES S250E 3 feet (0.9 m) 14 feet (4.3 m)...

This Category 6a Ethernet cable is required for Ethernet camera systems with 10 Gb uplink connections (using NETGEAR ProSafe GSM7228S and Intel X540-T1 ). Shielded CAT5E, CAT6 or CAT6A Ethernet cables are recommended for harsh EMI environments and system CE compliance. Shielded cables can be purchased at numerous online retailers, or as special order items through OptiTrack....

RCA plug to RCA plug Used to synchronize OptiTrack's USB systems. For V100 and mixed systems, 1 cable is required per camera. For V100:R2 systems with OptiHubs, only the hubs need to be connected with a sync cable. Compatible Cameras: Flex 3 (V100:R2)

Replacement splitter cable that breaks out sync input and output in V100 and mixed USB camera systems. Compatible Cameras: Flex 3 (V100:R2)

Standard-A plug to Standard-A receptacle 16 feet (4.9 m) For extending the reach of USB hubs. This allows OptiTrack cameras to be located farther from the computer for larger capture volume sizes. Up to two cables can be used in series for longer distances. Note: Do not use between cameras and USB Hubs. Compatible Cameras: Flex 3 (V100:R2)

Standard-A plug to Mini-B plug 6 feet (1.8 m) For connecting cameras to hubs. This down angled Mini-B plug routes the cable to the back of the camera to avoid interfering with objects on the port side of the device. This is the recommended cable for most mocap setups involving truss or tripods. Compatible Cameras: Flex 13 / Flex 3 (V100:R2)

Standard-A plug to Mini-B plug 6 feet (1.8 m) For connecting cameras to hubs. This straight Mini-B plug routes the cable out the side of the camera to avoid interfering with objects directly behind the device. This cable is recommended for tight mounting situations or when the rear-facing down angle cable will not work. Compatible Cameras: Flex 13 / Flex 3 (V100:R2)

Standard-A plug to Standard-B plug For connecting hubs to a computer. 16 feet (4.9 m) Compatible Cameras: Flex 13 / Flex 3