Zubehör

8-port Gigabit PoE/PoE+ switch for use with Ethernet cameras. Supports up to: 7 PoE cameras (Prime13, Prime13W, Slim 13E) or 4 PoE+ cameras (Prime41, Prime17W) per switch. Compatible Cameras: S250e / Slim 13e / All Prime Cameras

For handling facial markers. Item is included with the $175 Facial Marker Set.

Standard-A plug to Standard-A receptacle 16 feet (4.9 m) For extending the reach of USB hubs. This allows OptiTrack cameras to be located farther from the computer for larger capture volume sizes. Up to two cables can be used in series for longer distances. Note: Do not use between cameras and USB Hubs. Compatible Cameras: Flex 3 (V100:R2)

Standard-A plug to Mini-B plug 6 feet (1.8 m) For connecting cameras to hubs. This down angled Mini-B plug routes the cable to the back of the camera to avoid interfering with objects on the port side of the device. This is the recommended cable for most mocap setups involving truss or tripods. Compatible Cameras: Flex 13 / Flex 3 (V100:R2)

Standard-A plug to Mini-B plug 6 feet (1.8 m) For connecting cameras to hubs. This straight Mini-B plug routes the cable out the side of the camera to avoid interfering with objects directly behind the device. This cable is recommended for tight mounting situations or when the rear-facing down angle cable will not work. Compatible Cameras: Flex 13 / Flex 3 (V100:R2)

Standard-A plug to Standard-B plug For connecting hubs to a computer. 16 feet (4.9 m) Compatible Cameras: Flex 13 / Flex 3

Convert a Valve Index into an OptiTrack Active ready HMD. Carries a factory installed Active Tag with 8 LEDs. Go beyond room scale with superior, low latency, artifact free tracking. Requires the OpenVR driver .

A heavy duty wall mount assembly including Speed-Rail flange and powder-coated stub-out. This wall mount is designed for mounting to studs, concrete walls, or other reinforced surfaces. Only compatible with the Manfrotto Super Clamp with 3-way Head. Does not include mounting screws.